Upright Pintle and Screw Eye4 – 5/8″ Screw for 1/2″ Pintle System / For 1/2″ Pintle System

Description

• Upright pintle mounts to gate post and screw eye mounts to gate or it can be mounted upside down with the screw eye going into the post and the upright pintle mounting to the gate.
• The “Upright” and the “Screw Eye” are ordered as separate components.
• When ordering components make sure that the pintle sizes match. The pintle sizes available for these components are 1/2″ and 5/8″.
• The weight ratings listed are for one hinge and are additive. For example, if the listed weight rating is 100 lbs. and you install two hinges, your two hinges would be rated for a 200 lb gate.
• Upright Pintle installs with two 3/8″ lag screws or carriage bolts (not included).
• Note: The sizes listed as the “Pintle Diameter” (for example 3/4″ Pintle) are nominal dimensions, meaning they do not measure exactly that dimension. Use our “nominal dimension” to match up our Straps with our Bolts, etc. when you are ordering our products. If you order one of our products to match a pintle diameter of something that you already own, you do so at your own risk.

1/2″ Pintle:

• Upright pintle measures 4-1/4″ long x 1-1/4″ wide.
• Screw eye measures 4-5/8″ long.
• 100 lb per hinge weight rating.

5/8″ Pintle:

• Upright pintle measures 4-1/4″ long x 1-1/4″ wide.
• Screw eye measures 5-5/8″ long.
• 150 lb per hinge weight rating.

Specialty Hinges